TM 5-4310-373-14
This task covers:
The removal and installation of hoses.
INITIAL SETUP
Tools:
Equipment Condition:
Compressor unit OFF
Shutoff valve closed or air in tank discharged
Materials/Parts:
As required
Personnel Required:
Approximate Time Required (minutes):
1 Mechanic
15
LOCATION/lTEM
ACTION
REMARKS
WARNING
Shutoff valve must be closed
or air in tank must be dis-
charged before removal of
hoses. Removal under pres-
sure could cause serious
injury.
1. Shutoff valve (1)
Close.
2. Inflator gage (2)
Depress lever to discharge re-
maining air in hoses.
3. Hoses (3)
Remove by disconnecting
couplings at 4, 5, and 6.
1. Hoses (3)
a. Install by connecting
couplings at 4, 5, and
6.
b. Tighten.
2. Shutoff valve (1)
Open.
Figure 4-91. Air hose replace
4-86
