TM 5-4310-373-14
ACTION
REMARKS
LOCATION/lTEM
5-2. COMPRESSOR/ASSEMBLY - continued
CAUTION
Coat all components with oil
before assembly.
Install in crankcase.
6. Crankshaft and bearings
(6)
See para 4-39.
7. Centrifugal unloader
Install.
8. Connecting rod caps
Remove from connecting
rods.
(7)
Attach to crankshaft with
Be sure connecting rods and caps mate as marked.
9. Connecting rod assembly
(7)
caps and bolts (8) and
tighten.
NOTE
To prevent air from leaking past pistons when compressor
Turn rings on pistons so that
is operating.
ring gaps are not in line with
each other.
10. Gasket (9)
Place into position on crank-
case.
Use suitable ring compressor to compress rings on pistons.
Install by placing over pistons
11. Cylinder (10)
with rings compressed and
push down.
12. Capscrews (11)
Install and tighten.
See para 4-36.
Install.
See para 4-32.
Install on unit.
Fill with oil
See para 3-2.
5-7
