TM 5-4310-373-14
REMARKS
ACTION
LOCATION/lTEM
5-1. COMPRESSOR DISASSEMBLY - continued
CAUTION
Pistons, connecting rods and
caps are matched parts and
seat with the operation of the
compressor. They must keep
their original positions at re-
assembly. Mark each connect-
ing rod and cap, piston, and
bearing component to be sure
they match when they are
reassembled. Also mark the
cylinders from which they
are removed.
7. Crankshaft (6)
Turn until pistons are at top
Connecting rods will be easier to remove.
dead center.
Place hand under connecting rods to prevent caps from
Remove from connecting
8. Bolts (4)
falIing to bottom of crankcase.
rods (5).
Remove from crankshaft
9. Connecting rod assembly
(6).
(5)
Be sure connecting rods and caps mate as marked.
Attach to connecting rods
10. Connecting rod caps (5)
with bolts.
See para 4-38.
Remove.
11. Centrifugal unloader
Remove from crankcase.
12, Crankshaft and bearings
(6)
Remove.
13. Plug (7)
Remove.
14. Cap (8)
Remove.
15. Pipe (9)
Remove.
16. Plug (10)
Do not remove.
17. Oil gage (11)
CAUTION
Oil gage will be damaged if it
is removed. Remove only if
gage is defective. Remove by
driving out from inside of
crankcase with hard wood
form.
5-4
