TM 5-4310-375-14
Table 3-2. Troubleshooting
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. COMPRESSOR PUMPING OIL
Step 1. Check for a clogged air intake filter element.
Service the air intake filter as follows:
Remove wing nut (1, fig 3-1).
a.
Remove cover (2).
b.
Lift element (3) out of base (4).
c.
d. Clean element (3) by washing in warm water and low-sudsing household type detergent.
Rinse thoroughly in clean water and air dry. Wipe out inside of filter base (4) and inside
of cover (2) with a clean lint-free cloth.
Install clean element (3) in base (4).
e.
f.
Install cover (2) and secure with wing nut (1).
Figure 3-1. Compressor air intake jilter service.
3-3
