TM
5-4310-376-14
OPERATING INSTRUCTIONS
Section I. DESCRIPTION AND USE OF OPERATOR'S CONTROLS AND INDICATORS
2-1. CONTROLS AND INDICATORS
Controls and indicators used by the operator are shown in figure 2-1.
Function
Control or Indicator
Key
Starts engine.
1
Rewind starter
Indicates by level, oil in engine crankcase.
2
Extended oil fill
Stops engine.
Stop switch
3
Alter fuel/air mixture for starting.
Choke
4
Drain cock
5
Drains condensation build-up from air
receiver tank.
Turns air flow on and off to inflator gage.
6
Globe valve
Controls and indicates amount of air being
Inflator gage
7
discharged.
Prevents overpressure in case of unloading
Safety valve
8
control valve malfunction.
Indicates amount of air pressure in air rec-
Pressure gage
9
eiver tank.
Prevents air from air receiver tank returning
10
Unloading control valve
to compressor pump. Vents air over 200 +0,
-10 psi.
Turns fuel flow on and off to gasoline engine.
Fuel shutoff valve
11
Indicates by gage, fuel in fuel tank.
12
Fuel indicator
