TM 5-4310-376-14
A - After Operation
D - During Operation
B - Before Operation
Equipment is
Interval
ITEM TO BE INSPECTED
Item
not Ready/Avail-
No.
PROCEDURE
able If:
D
1
COMPRESSOR DRIVE
Missing hardware.
Belt Guard - Inspect for dents, cracks, breaks,
loose or missing screws and other damage (para
3-7a(1)).
Belt set defective.
Belt Set - Inspect for cracks, fraying, and exces-
sive wear (para 3-7a(2)).
Loose belts.
Belt Tension - Check tension.
Engine drive pulley
Pulley and Hub - Inspect for cracks, chips, loose
loose. Screws missing.
screws, or other damage (para 3-7a(3)).
2
Fuel tank leaks.
Fuel Tank (1) - Inspect for cracks, dents or other
damage. Inspect tank cap and gasket (2) for wear
and deterioration (para 3-7b).
Fuel line leaks.
Fuel Lines (3) - Inspect fittings and clamps.
Tank empty.
Fuel Level (4) - Check fuel level and add fuel if
required.
2-5
