Section IV. ORGANIZATIONAL TROUBLESHOOTING

TM 5-4310-376-14

4-11. GENERAL

Troubleshooting at the organizational maintenance level requires you to locate any trouble

as quickly as possible. Once trouble is located, repair or replace the part if you are author-

ized to do so or determine if a higher category of maintenance is required. Repairs by organ-

izational maintenance are limited by tools, test equipment and replacement parts allocated

to that level.

Before using the troubleshooting table (table 4-2), check

your work order and talk to the operator, if possible, for

a description of symptoms if trouble occurred while equip-

ment was in operation.

4-12. TROUBLESHOOTING TABLE

Table 4-2 lists common problems that may occur during operation or maintenance of the air

Follow these steps to use table 4-2:

(1) Find the problem under MALFUNCTION.

(2) Check for possible causes of the problem under TEST OR INSPECTION.

(3) Use the procedures under CORRECTIVE ACTION to correct the problem.

This manual cannot list all troubles that may occur, nor everything to check, nor all possible

procedures to correct troubles listed. If trouble is not listed in table 4-2 or is not corrected

by procedures under CORRECTIVE ACTION, notify direct support maintenance.