TM5-4310-376-14
This task covers:
c. Inspection
d. Installation
b. Cleaning
a. Removal
INITIAL SETUP
Equipment Condition
Tools Required
Tool Kit, General Mechanic's
Engine shut down and cool.
Flywheel Holder
Starter Clutch Wrench
Materials Required
Brush, Medium Bristle (item 8, Appendix E)
Solvent, Dry Cleaning (item 1, Appendix E)
Cloth, Lint-Free (item 2, Appendix E)
ACTION
REMARKS
LOCATION/ITEM
Housing (1)
Remove four screws (11) attaching starter housing (10) to blower housing (3).
Remove starter housing (10) from blower housing (3) and from clutch (6) by pulling
(2)
starter (10) straight out from housing.
(3)
Remove four screws (1) and pull blower housing (3) away from engine (4) being
careful not to damage wires attached to switch (2).
Tag and disconnect wire attached to switch (2) and remove blower housing (3) from
(4)
engine (4).
Remove four screws (9), pulley (8), and screen (7) from clutch (6).
(5)
Use care when removing clutch as clutch can come apart easily and ball bearings
inside may be lost.
Clutch housing has a left hand thread.
Brace flywheel (5) with flywheel holder and remove clutch (6) with starter clutch
(6)
wrench by rotating clutch (6) clockwise.
Change 6 4-63
