TM 5-4310-379-14
5-26. Clutch Assembly.
This task covers:
Repair
INITIAL SETUP:
Tools
Equipment Condition
General Mechanic's Tool Kit
(NSN 5180-0-1 77-7033)
Clutch assembly removed (para. 4-23).
Caliper Set, Micrometer (NSN 5210-00-554-7134)
Materials/Parts
Solvent, Dry Cleaning (Item 23, Appendix D)
Rags, Wiping (Item 21, Appendix D)
Repair. (figure 5-33)
NOTE
The clutch assembly is partially disassembled for removal.
(1)
Remove clutch release spring (1) from clutch release sleeve (2).
(2)
Mark release sleeve collar (3) and release sleeve (2) and remove two screws (4) and nuts (5) and remove
release sleeve collar (3) from release sleeve (2).
(3)
Remove three retaining rings (6) and pins (7) and remove release sleeve (2).
(4)
Remove three retaining rings (8) and pins (9) and remove six links (10).
(5)
Remove three retaining rings (11) and pins (12) and remove three levers (13).
(6)
Remove screw (14) and lockwasher (15) and remove lock (16).
(7)
Remove adjusting ring (17) from pressure plate (18).
(8)
Remove pressure plate (18) and three springs (19) from clutch body (20).
WARNING
Dry cleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive
heat. Flash point of solvent is 100-138°F (38-60°C).
(9)
Clean all items except clutch discs (21) with dry cleaning solvent and dry thoroughly.
5-110
