TM 5-4310-380-13
3-19. COMPRESSOR PULLEY AND FAN - Continued.
Figure 3-23. Compressor Pulley and Fan, Removal.
(1) Remove bolt (1), washer (2), and thrust washer (3).
(2) Remove six bolts (4), six washers (5), and remove cooling fan (6).
(3) Use a gear puller and remove the compressor pulley (7) from the compressor (8).
NOTE
Use a nut to protect threads in compressor shaft when using gear puller.
(4) Remove key (9).
b. Cleaning.
(1) Remove all buildup of dirt, grease, etc. by wiping with a soft cloth (Appendix E, item 3).
WARNING
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use solvent only in a
well-ventilated area. Avoid prolonged breathing of fumes. Keep solvent away from flames.
Do not use in excessive amounts. Avoid skin contact.
(2) Clean using a clean, soft cloth (Appendix E, item 3) or a medium bristle brush (Appendix E, item 4) and
cleaning solvent (Appendix E, item 2).
GO TO NEXT PAGE
3-42
