TM 5-4310-380-13
3-19. COMPRESSOR PULLEY AND FAN - Continued.
b. Cleaning - Continued.
(3) Allow to dry.
c. Inspection.
(1) Inspect for missing or damaged hardware.
(2) Inspect compressor pulley for damage.
d. Repair. Repair is limited to the replacement of a defective compressor pulley or fan.
Figure 3-24. Compressor Pulley and Fan, Installation.
NOTE
Clean shaft and apply a coat of grease (Appendix E, item 6).
(1) Install key (9) on compressor shaft.
(2) Install compressor pulley (7) to compressor (8).
(3) Install cooling fan (6) on pulley (7).
(4) Install six washers (5) and six bolts (4).
(5) Install thrust washer (3), washer (2), and bolt (1).
END OF TASK
3-43