TM 5-4310-380-13
3-18. OIL FILLER CAP, BREATHER CAP, PLUG, AND SIGHT GAGE - Continued.
Figure 3-21. Oil Filler Cap, Breather Cap, Plug, and Sight Gage, Removal.
(1) Remove oil filler cap (1) and gasket (2).
(2) Remove oil plug (3), elbow (4), and nipple (5).
(3) Remove breather cap (6), ball (7), body (8), and gasket (9).
(4) Remove four screws (10), cover (11), seal (12), and oil gage (13) from the crankcase (14). Discard seal
(12).
b. Cleaning.
(1) Remove all buildup of dirt, grease, etc. by wiping with a soft cloth (Appendix E, item 3).
WARNING
Cleaning Solvent, Federal Specification P-D-680, is toxic and flammable. Use solvent only in a
well-ventilated area. Avoid prolonged breathing of fumes. Keep solvent away from flames.
Do not use in excessive amounts. Avoid skin contact.
(2) Clean using a clean, soft cloth (Appendix E, item 3) or a medium bristle brush (Appendix E, item 4) and
cleaning solvent (Appendix E, item 2).
(3) Allow to dry.
GO TO NEXT PAGE
3-39
