TM 5-4310-382-13
3-33. FAN AND PULLEY.
This task covers:
a. Removal
b. Cleaning
c. Inspection
d. Installation
INITIAL SETUP
Tools Required
Tool Kit, General Mechanic's
Materials Required
Brush, Medium Bristle (item 4, Appendix E)
Solvent, Dry Cleaning (item 2, Appendix E)
Cloth, Lint-Free (item 3, Appendix E)
Equipment Condition
Engine shut down and cool.
Belt guard removed (see para 3-15).
Drive belts removed (see para 3-16).
a. Removal.
(1) Remove screw (1) and washer (2) from pulley (3).
(2) Using a puller, remove pulley (3) and key (5) from compressor shaft (4).
Figure 3-38. Fan and Pulley, Removal.
3-77
