TM 5-4310-385-13
2-6. ELECTRICAL CONNECTIONS. Connect the motor starter to a 208 VAC 3 phase power source. The source must
have a separate on/off switch for the compressor.
Motor Starter Connections
2-7. INITIAL SERVICE.
CAUTION
The compressor is shipped without oil in the crankcase. Running compressor
without oil will damage the equipment.
a.
Before start-up, remove either fill plug (1 ) and fill the crankcase with 10 oz. (.3 L) of oil. Refer to Table 2-2 for
proper oil viscosity. Replace the fill plug.
Oil Fill
2-8
