TM 5-4310-393-14
NOTE
Verify that grooved end in the valve
body enters injection pump opening
first.
p.
Install new preformed packing (7),
and then tighten delivery valve holder assembly into
injection pump.
FIGURE 5-11. EXTRA FUEL DEVICE
WARNING
BEFORE
STARTING
THE
ENGINE
AND
AFTER
MAKING
REPAIRS
OR
ADJUSTMENTS ON THE FUEL SYSTEM, A 17 MM OPEN END WRENCH MUST BE
AVAILABLE TO ALLOW RAPID REMOVAL OF THE STEEL FUEL LINE AT THE
INJECTION PUMP IN CASE OF A RUNAWAY CONDITION. FAILURE TO HEED THIS
WARNING COULD RESULT IN INJURY OF PERSONNEL AND EQUIPMENT
DAMAGE.
q.
Install fuel hoses, and hose clamps
in reverse order of removal. Remove fuel shutoff clamp
from fuel hose.
FIGURE 5-12. DELIVERY VALVE REASSEMBLY
5-14
