TM 5-4310-451-14
4-63. REAR AXLE REPLACEMENT (Con’t).
4.
Raise axle (2) and place on jackstands.
5.
Remove brakeshoes (see paragraph 4-66).
b.
INSTALLATIONI
1.
Install brakeshoes (see paragraph 4-66).
2.
Remove axle (2) from jackstands.
NOTE
Ensure that pin on spring aligns with hole In axle.
3.
Position axle (2) under air compressor unit and raise into position.
4.
Install two brackets (3) and four U-bolts (1) on axle (2) with eight nuts (4).
5.
Remove lifting device from under axle (2).
FOLLOW-ON TASKS:
• Install handbrake cables in axle brackets (see paragraph 4-65).
• Install wheels (see paragraph 4-67).
• Remove compressor unit frame from jackstands.
4-141/(4-142 Blank)
