TM 5-4310-451-14
4-64. HANDBRAKE LEVER REPLACEMENT (Con’t).
a. REMOVAL
1. Remove cotter pin (6), clevis pin (2), and clevis (3) from handbrake lever (5). Discard cotter pin.
2.
Remove four nuts (7), lockwashers (8), screws (1), and handbrake lever (5) from bumper (4). Discard
lockwashers.
b.
INSTALLATION
1.
Install handbrake lever (5) on bumper (4) with four screws (1), new lockwashers (8), and nuts (7).
2.
Install clevis (3) on handbrake lever (5) with clevis pin (2) and new cotter pin (6).
TA704804
4-144
