TM 5-4310-451-14
4-72. TIE-ROD MAINTENANCE.
This Task Covers:
a.
Removal
c.
Installation
b.
Cleaning and Inspection
d.
Adjustment
Initial Setup:
Tools/Test Equipment:
Materials/Parts:
General mechanic's tool kit
Dry cleaning solvent (Item 38, Appendix E)
Common no. 1 shop set
Two cotter pins
General Safety Instructions:
References:
Dry cleaning solvent Is flammable and must not be
TM 9-8000
used near open flame. Use only in a well-ventilated
area.
1.
Remove cotter pin (3) and slotted nut (2) from tie-rod end (9). Discard cotter pin.
2.
Remove cotter pin (6) and slotted nut (5) from tie-rod end (7). Discard cotter pin.
3.
Remove tie-rod (8) from steering arm (1) and steering knuckle (4).
TA704831
a. REMOVAL
4-175