TM 5-4310-451-14
4-71. STEERING ARM REPLACEMENT (Cont).
b.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, Is toxic and flammable. Always wear protective goggles and
gloves, and use only In a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO
NOT breathe vapors. DO NOT use near open flame or excessive heat. The solvents flash point Is
100°F-138°F (38°C-59°C). If you become dizzy while using cleaning solvent, Immediately get fresh
air and medical help. If solvent contacts eyes, Immediately wash your eyes and get medical aid.
1.
Clean all parts with dry cleaning solvent. Allow to dry.
2.
Inspect pin for burrs, nicks, and other damage. Remove burrs. Replace if otherwise damaged.
3.
Inspect steering arm (4) for damage. Replace if damaged.
4.
Inspect four lubrication fittings (8) in steering arm (4) for damage. Remove and discard lubrication fittings if
damaged.
c
INSTALLATION
1.
If removed, install four lubrication fittings (8) in
steering arm (4).
TA704829
4-173