TM 5-4310-451-14
4-70. STEERING KNUCKLE REPLACEMENT (Con’t).
2.
Position steering knuckle (3) on axle (5).
3.
Install kingpin (6) through axle (5) and steering knuckle (3) with spring pin hole alined.
4.
Install new spring pin (7) through axle (5) and kingpin (6).
5.
Install tie-rod end (4) on steering knuckle (3) with slotted nut (1) and new cotter pin (2).
FOLLOW-ON TASKS:
Install hub and wheel bearings (see paragraph 4-68).
TA704827
4-171
