TM 5-4310-451-14
5-34. FLYWHEEL HOUSING AND REAR OIL SEAL REPLACEMENT (Con’t).
29.
Apply coat of grease to new gasket (38) and install gasket on oil filler cover (37).
30.
Install oil filler cover (37) and gasket (38) using five new lockwashers (36) and screws (35).
NOTE
Copper washer Is used on long screw.
31.
Install new copper washer (39) and screw (40) fingertight.
32.
Torque screws (35) to 25-30 lb.-ft. (34-41 Norm).
FOLLOW-ON TASKS:
Install flywheel (see paragraph 5-33).
Install air compressor drive ring (see paragraph 5-100).
Install rear engine mounts (see paragraph 5-16).
Install engine starter (see paragraph 4-53).
Install governor control bracket (see paragraph 4-40).
Install engine breather (see paragraph 4-30).
TA704982
5-102
