TM 5-4310-451-14
5-34. FLYWHEEL HOUSING AND REAR OIL SEAL REPLACEMENT (Cont).
12.
Install five new lockwashers (26) and screws (25).
13.
Apply coat of grease to new gasket (32) and install on access cover (31).
14.
Install access cover (31) and gasket (32) on flywheel housing (4) with two new lockwashers (27) and screws (28).
15.
install four washers (30), screws (29), new lockwashers (33), and nuts (34).
16.
Apply coat of grease to new gasket (19) and install on access cover (20).
17.
Install access cover (20) and gasket (19) on flywheel housing (4) with two new lockwashers (24) and screws (23).
NOTE
Install nut In same position from which it was removed.
18.
Install four new lockwashers (21), screws (22), and nut (18).
5-99