TM 5-4310-451-14
5-35. PISTONS, CONNECTING RODS, AND CYLINDER SLEEVES REPLACEMENT
(Con’t).
CAUTION
DO NOT use scribe or punch to mark
piston, connecting rod, or cylinder
head mounting surface of engine
crankcase.
4.
Tag piston (2), connecting rod (7), and engine
crankcase (3).
5.
Rotate engine crankcase (3) so bearing cap (5)
faces upward.
6.
Remove rag.
NOTE
Perform steps 7 through 9 for each of
six pistons.
7.
Remove two nuts (4) and bearing cap (5) with
sleeve bearing (6) from connecting rod (7).
NOTE
Cylinder sleeve may be removed with piston.
8.
Remove piston (2), connecting rod (7), two bolts
(9),
and
sleeve
bearing
(8)
from
engine
crankcase (3) as an assembly.
5-104
