TM 5-4310-451-14
5-36. PISTON REPAIR (Con’t).
10.
Mark piston (10), piston skirt (14), piston pin
(15), and sleeve bearing (16).
11.
Remove piston pin (15) and piston skirt (14)
from piston (10).
12.
Remove spacer ring (17) and sleeve bearing
(16) from piston (10).
WARNING
Dry cleaning solvent, P-D-680, Is toxic and flammable. Always wear protective goggles and
gloves, and use only In a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO
NOT breathe vapors. DO NOT use near open flame or excessive heat. The solvent’s flash point Is
1000F-138°F (38°C-59°C). If you become dizzy while using cleaning solvent, Immediately get fresh
air and medical help. If solvent contacts eyes, Immediately wash your eyes and get medical aid.
1.
Clean all parts with dry cleaning solvent.
2.
Clean ring grooves and oil holes in piston.
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles and
gloves, and use only In a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO
NOT breathe vapors. DO NOT use near open flame or excessive heat. The solvent's flash point is
1000F-1380F (38°C-59°C). If you become dizzy while using cleaning solvent, Immediately get fresh
air and medical help. If solvent contacts eyes, Immediately wash your eyes and get medical aid.
3.
Clean piston with dry cleaning solvent.
TA704991
5-111
