TM 5-4310-451-14
5-39. CAMSHAFT MAINTENANCE (Con’t).
NOTE
Rag Is used between camshaft gears
to prevent gears from turning.
2.
Place clean rag between left camshaft gear (4)
and right camshaft gear (5).
3.
Remove nut (7) from rear end of each of two
camshafts (6 and 8).
4.
Remove nut (14), lockwasher (13), and accessory drive pulley (12) from front of camshaft (8). Discard
lockwasher.
5.
Remove woodruff key (9) and spacer (11) from camshaft (8).
6.
Remove seal (10) from camshaft (8). Discard seal.
TA705003
5-124
