TM 5-4310-451-14
5-39. CAMSHAFT MAINTENANCE (Con’t).
5.
Install woodruff key (25) in camshaft (8).
6.
Aline left camshaft gear (4) with woodruff key
(25) and install left camshaft gear on camshaft
(8).
7.
Install nut (7) on camshaft (8) and tighten finger-
tight.
8.
Apply light coat of lubricating oil to two bearing
journals (30).
9.
Place four halves of bearing sets (28) on two
bearing journals (30).
NOTE
Both ends of lockrlngs must cover
split of bearIng set and be Installed
over bottom half of bearing set.
Bottom half of bearing set Is one
without hole.
10.
Install four lockrings (27) over bottom half of two
bearing sets (28).
TA705009
5-130
