TM 5-4310-451-14
5-59. FUEL INJECTOR CONTROL TUBE MAINTENANCE (Con’t).
b. DISASSEMBLY
NOTE
Steps 1 through 6 are for disassembly of left bank Injector control tube. Steps 7
through 13 are for disassembly of right bank Injector control tube.
1.
Remove bracket (11) from control tube (4).
NOTE
Three control levers are removed same way.
2.
Loosen locknut (9) and screw (8) and remove three control levers (10) from control tube (4).
3.
Remove locknut (9) and screw (8). Discard locknut.
4.
Remove spring (12) from control lever (10).
TA705066
5-194
