TM 5-4310-451-14
5-59. FUEL INJECTOR CONTROL TUBE MAINTENANCE (Con’t).
5.
Remove pin (16) and clevis (6) from
control tube (4). Discard pin.
6.
Remove spacer (13), bracket (14), and spring
(15).
7.
Remove bracket (11) and spring (17) from
control tube (4).
8.
Loosen locknut (9) and screw (8) and remove
control lever (10).
9.
Remove locknut (9) and screw (8). Discard
locknut.
10.
Remove spring (12) from control lever (10).
11.
Repeat steps 8 through 10 for two remaining
control levers (10).
TA705067
5-195
