TM 5-4310-451-14
5-59. FUEL INJECTOR CONTROL TUBE MAINTENANCE (Cont).
11.
Position control lever (10) and spring (12) over slot in control tube (4).
12.
Install control lever (10) on control tube (4) with screw (8) and new locknut (9).
13.
Repeat steps 11 and 12 for next two control levers (10).
14.
Install bracket (11).
LEFT BANK INJECTOR CONTROL TUBE
e.
INSTALLATION
NOTE
Right and left bank Injector control tubes are Installed same way. This procedure covers right
bank Injector control tube.
1.
Install control tube (4) in cylinder head (7) using four screws (5).
2.
Install pin (1) through clevis (6) and governor rod (3).
3.
Install new cotter pin (2) through pin (1).
TA705070
5-198