TM 5-4310-451-14
5-64. BLOWER ASSEMBLY REPAIR (Cont.).
56.
Install spacer (27), disk (24), new lockwasher
(25), and screw (26) in front end plate (23).
Torque screw to 65 lb.-ft. (88 Nom).
57.
Bend two or more tangs of lockwasher (25)
contacting flat side of screw (26).
58.
Apply a light coat of grease to back of two spring
seats (14).
59.
Place four spring retainers (13) in grooves of
coupling support (9).
60.
Install two spring seats (14) Inside coupling
support (9).
61.
Coat spring packs (16) lightly with lubricating oil
(Item 31, Appendix E) and install in coupling
support (9).
62.
Place cam (15) over end of installer tool with
large chamfered end of cam facing up.
63.
Insert installer tool between spring packs (16)
until cam (15) is centered between spring packs.
64.
Remove installer tool.
TA705106
5-235
