TM 5-4310-451-14
5-65. BLOWER DRIVE SUPPORT MAINTENANCE (Cont.)
5.
Remove nut (16), lockwasher (15), thrust washer (20), thrust bearing (19), drive gear (7), and thrust bearing (18)
from drive support (17). Discard lockwasher.
6.
Remove two bushings (21) from drive gear (7) If replacement Is required.
c. CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
The solvent's flash point is 100°F-138°F (38°C-59°C). If you become dizzy while using
cleaning solvent, Immediately get fresh air and medical help. If solvent contacts eyes,
Immediately wash your eyes and get medical aid.
1.
Clean all metal parts with dry cleaning solvent.
TA705111
5-240
