TM 5-4310-451-14
5-64. BLOWER ASSEMBLY REPAIR (Cont.).
65.
Install retainer (10), flat side down, over coupling
support (9).
66.
Aline holes In retainer (10) with coupling support
(9) and gear (8) and install six screws (12) and
new lockwashers (11).
CAUTION
Coupling support must be centered on gear to
prevent misalignment of shaft causing damage
to blower.
67.
Ensure that coupling support (9) is centered on
gear (8) and torque six screws (12) to 25 lb.-ft.
(34 Nìm).
TA705107
5-236
