TM 5-4310-451-14
5-66. LOAD SOLENOID MAINTENANCE (Con’t).
e. ADJUSTMENT
NOTE
There should be slight tension on spring when bracket Is pulled toward load solenoid.
1.
Pull bracket (14) toward load solenoid (3). If there is slight tension on spring (5), adjustment Is okay. If there is no
tension, or spring Is pulling governor clevis toward load solenoid, continue with adjustment.
2.
Loosen two nuts (13).
3.
Slide bracket (14) toward or away from load solenoid (3) to increase or decrease spring (5) tension.
4.
When slight tension is felt on spring (5), hold bracket (14) In place and tighten two nuts (13) against bracket.
TA705116
5-246
