TM 5-4310-451-14
5-100. AIR COMPRESSOR ASSEMBLY REPLACEMENT (Con’t).
a. REMOVAL
CAUTION
Ensure that engine is suitably supported before removing air compressor assembly. Engine and
air compressor assembly may be damaged.
1.
Make alignment marks on air compressor assembly (2) and engine (1).
2.
Attach suitable lifting device to air compressor assembly (2). Remove slack from lifting sling.
WARNING
Use extreme caution when handling heavy parts. Lifting device is required when parts weigh over
50 lb (23 kg) for a single person lift, over 100 lb (45 kg) for a two person lift, and over 150 lb (68 kg)
for a three or more person lift. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause serious injury or death to personnel.
3.
Remove 24 bolts (4) and lockwashers (3) from air compressor assembly (2) and engine (1). Discard lockwashers.
4.
Remove air compressor assembly (2) from engine (1) and place on suitable support.
5.
Remove lifting device from air compressor assembly (2).
6.
Remove eight bolts (5), lockwashers (6), and drive ring (7) from engine (1). Discard lockwashers.
TA705224
5-374
