TM 5-4310-451-14
5-102. OIL SEPARATOR REPLACEMENT (Con’t)
3.
Install two new lockwashers (16), screws (17), and nuts (14) on two brackets (18) and frame (15).
4.
Install four nuts, new lockwashers and screws holding oil separator to oil separator and fuel tank supports (see
paragraph 4-86).
5.
Remove lifting device from oil separator (1).
6.
Apply sealing compound to threads of oil separator (1) and nipple (3) and install elbow (2) and nipple on oil
separator.
7.
Apply sealing compound to threads of nipple (11) and install nipple and elbow (10) on discharge valve (12).
TA705229
5-380
