TM 5-4310-451-14
5-102. OIL SEPARATOR REPLACEMENT (Con’t).
8.
Apply sealing compound to threads of nipple (9) and install nipple on elbow (10).
9.
If removed, install two new gaskets (7) on couplers (6).
10.
Position two couplers (6) and coupling (8) on nipples (3 and 9).
11.
Install two clamps (4) on couplers (6) with two screws (5) and nuts (13).
FOLLOW-ON TASKS:
Install oil separator element (see paragraph 4-90).
Install oil separator oil fill tube (see paragraph 4-92).
Install oil separator drain valve (see paragraph 4-94).
Install oil separator oil level gage (see paragraph 4-91).
Install thermal valve (see paragraph 4-89).
Install safety relief valve (see paragraph 4-88).
Install minimum pressure valve (see paragraph 5-104).
Install center roof panel (see paragraph 5-85).
Install right side roof panel (see paragraph 5-82).
5-381
