TM 5-4310-452-14
4-62. SHUTDOWN RELAY REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Two self -locking nuts
• Engine off.
• Two self-locking nuts
• Left door assembly open.
• Battery cables disconnected (see paragraph
Tools/Test Equipment:
4-57).
• General mechanic's tool kit
a.
REMOVAL
1.
Disconnect 5 electrical leads (5) from shutdown
relay (1).
2.
Remove 2 self-locking screws (3), nuts (2), and
shutdown relay (1) from control panel (4). Discard
self-locking screws and nuts.
b.
INSTALLATION
1.
Position shutdown relay (1) in place on control panel
(4) and install 2 new self-locking screws (3) and nuts
(2).
2.
Connect 5 electrical leads (5) to shutdown relay (1).
FOLLOW-ON TASKS:
• Connect battery cables (see paragraph 4-57).
• Close left door assembly.
TA505498
4-116
