meter, or until checks by dipstick or other
(3) Remove the cap that closes the filler
means indicates that a sufficient quantity
opening. Insert the nozzle of the quart
has been added.
meter control valve (14) into the filler
opening. Add oil by squeezing the control
(4) Clean the cap or filler plug, and replace it
handle trigger until the desired amount
in the filler opening. Rewind the hose.
shows on the meter, or until checks by
Replace the control handle on the
dipstick or other means indicate that a
bracket, and lock the gear oil reel (5) by
sufficient quantity has been added.
pulling downward on the reel lock handle.
(4) Clean the cap or plug and replace it in the
c. Dispensing Engine Oil.
filler opening. Rewind the hose. Replace
the control handle on the bracket (2) and
(1) Prepare the engine oil pump (5, fig. 10)
lock the reel (1), by pulling downward on
for operation. Refer to paragraphs 52 and
the reel lock handle.
53.
d. Use of Air Chuck.
(2) Release the reel brake handle (16, fig. 11)
(1) Remove the air chuck (3, fig. 14) and air
from the engine oil hose reel (1) and pull
pressure gage (19) from the lower
out the proper length of hose. Advance
accessory drawer (9, fig. 11).
the meter in the quart meter control valve
(2) Attach the air pressure gage and air chuck
(14) to "0".
to the air line coupler (17, fig. 11) of the
Caution
air service reel hose (3).
Do not try to advance the meter re-
(3) Press the air chuck down firmly on the tire
set beyond the "0" stop position.
valve, it automatically sends air into the
tube. When the proper pressure has been
1
Oil spray gun
4
Utility gun
7
Oil spray container
2
High-pressure lever gun
5
Flexible nozzle
8
Air line coupling
3
Swiveling hydraulic adapter
6
Hacksaw
Figure 15. Accessory items upper drawer.
28