3-85. Hangers and Springs
a. Removal.
(1) Remove the shock absorber (para
the shock absorbers.
b. Cleaning and Inspection.
(1) Clean the shock absorbers with an
hangers and springs.
approved cleaning solvent and dry thoroughly.
b. Cleaning and Inspection.
(2) Inspect for cracks, breaks, dents, and
(1) Clean all parts with an approved
other damage.
cleaning solvent and dry thoroughly.
(3) Replace a damaged or defective
(2) Inspect for cracks, breaks, and other
shock absorber.
damage.
(3) Replace a damaged or defective han-
c. Installation. Refer to figure 3-21 and in-
ger and spring.
stall the shock absorber.
3-30