Figure 3-21 y -Continued
c. Installation.
b. Cleaning and Inspection.
(1) Refer to figure 3-21 and install the
(1) Clean all parts with an approved
hangers and springs.
cleaning solvent and dry thoroughly.
(2) Inspect for cracks, breaks, damaged
(2) Install the shock absorbers (para
threaded parts, and other damage.
(3) Replace a damaged or defective
lunette and connector.
3-86. Spring Bumpers
install the lunette.
the spring bumpers.
b. Cleaning and Inspection.
3-88. Wheel Chocks
(1) Clean the bumpers with warm water
and soap.
the wheel chocks.
(2) Inspect for cracks, breaks and de-
terioration.
disassemble the wheel chocks.
(3) Replace a damaged or defective spring
c. Cleaning, Inspection and Repair.
bumper.
(1) Clean all metal parts with an ap-
proved cleaning solvent and dry thoroughly.
install the spring bumpers.
Clean the wooden blocks with a cloth.
(2) Inspect for cracks, breaks, and other
3-87. Lunette
damage.
(3) Replace a damaged or defective wheel
the lunette.
chock.
3-31
