b. Cleaning and Inspection.
(1) Clean all metal parts with an ap-
proved cleaning solvent and dry thoroughly.
(2) Inspect for cracks, breaks, leaks, and
other damage.
(3) Replace a damaged or defective relay
valve.
stall the relay valve.
3-80 Air Reservoir
the air reservoir.
b. Cleaning and Inspection.
(1) Clean the reservoir with an approved
cleaning solvent and dry thoroughly.
(2) Inspect for cracks, breaks, leaks and
other damage.
(3) Replace a damaged or defective air
reservoir.
install the air reservoir.
the air filters.
b. Disassembly and Reassembly. The air
filter may be disassembled and reassembled as
shown in figure 3-19.
c. Cleaning and Inspection.
(1) Clean the air filters with an approved
cleaning solvent and dry thoroughly.
(2) Inspect for cracks, breaks, leaks, and
other damage.
(3) Replace a damaged or defective air
filter.
d. Installation. Refer to figure 3-17 and
install the air filter.
Section XV. FRAME ASSEMBLY
sorbers are two-way control, double-acting,
3-82. General
hydraulic-cylinder units. This section contains
This section consists of the landing gear,
information on the maintenance of these items.
fenders, lunette, and reflectors. The shock ab-
