c. Installation.
(1) Refer to figure 3-23 and install the
Cable
fenders.
a. Removal.
(2) Install clearance lamps (para 3-66).
(1) Disconnect the air hose assembly
(2, fig. 3-25) from the hose bracket on the
3-90. Safety Chains
trailer chassis. Disconnect the electrical cable
from the receptacle and remove the cable.
the safety chains.
(2) Unscrew the air hose assembly from
coupling (3) and remove connector assembly
b. Cleaning and Inspection.
(6), tube assembly (7), coupling (3) and
(1) Clean all parts with an approved
identification tags (4 and 5).
cleaning solvent and dry thoroughly.
b. Installation. Install the intervehicular hose
(2) Inspect for cracks, breaks and other
assemblies in reverse of removal. Each hose
damage.
assembly is removed and installed in a similar
manner. Connect the electrical cable assembly
install the safety chains.
to the receptacle.
