TM 55-1905-223-24-8
d. Remove protective caps, plugs, inserts, wrappings, and tape when inspection/inventory is completed. Inspect
piping openings for damage. Wipe off dirt, grease, or protective films at time of installation.
e. Remove chocks from resilient mounted components.
3-5. Initial Setup Procedure. Includes operational checks and inspections that are not performed for a routine startup.
Direct support maintenance personnel will perform initial setup in accordance with the operator's manual, TM 55-1905-
223-10.
3-6. Normal Startup. Refer to operator's manual, TM 55-1905-223-10.
3-7. Shutdown Procedure (Usual or Unusual). Refer to operator's manual, TM 55-1905-223-10.
SECTION III. INTERMEDIATE DIRECT SUPPORT PREVENTIVE
MAINTENANCE CHECKS AND SERVICES (PMCS)
3-8. PMCS. There are no preventive maintenance checks and services required at the direct support level. Refer to
SECTION IV. INTERMEDIATE DIRECT SUPPORT TROUBLESHOOTING
3-9. Troubleshooting . Both a symptom index and a troubleshooting table are provided. The symptom index will help
you locate the information you need for troubleshooting.
SYMPTOM INDEX
Troubleshooting
Procedure
Knocks
Item 1
Overheats
Item 2
DISCHARGE PRESSURE AND AIR DELIVERY
Low
Item 5
OIL CONSUMPTION
Excessive
Item 3
3-2
