TM 9-4310-394-13
4-15.
BELT GUARD REPAIR AND REPLACEMENT.
This Task Covers:
a.
Removal
b.
Cleaning
c.
Inspection
d.
Repair
e.
Installation
INITIAL SETUP
Tools Required
Tool Kit, General Mechanic's (Appendix B, Item 1)
Material's/Parts Required
Cloth, Lint-Free (Appendix E, Item 1)
Brush, Medium Bristle (Appendix E, Item 2)
Solvent, Dry Cleaning (Appendix E, Item 3)
Equipment Condition
Air compressor unit shut down and cool.
Information plates removed (refer to para. 4-13) (Only if replacing belt guard).
a.
Removal.
(Refer to Figure 4-5).
(1)
Remove four screws (1), four lock washers (2), and four flat washers (3).
(2)
Remove two screws (4), two lock washers (5), and two flat washers (6).
(3)
Remove nut (7), screw (8), washer (9), bracket (10), bracket (11), rubber mount (12), and rubber
mount (13).
(4)
Remove upper belt guard frame (14) from lower belt guard frame (15).
(5)
Remove two screws (16), two lock washers (17), two flat washers (18), and bracket (19).
(6)
Remove lower belt guard frame (15) from unit.
(7)
Remove two screws (20), two lock washers (21), two flat washers (22), and gasket (23) from unit.
4-18
