TM 9-4310-397-14
4-31. COVERS, PANELS AND DOORS REPLACEMENT. - Continued
(b)
Drill out eight rivets (2) to remove door holder (3).
(c)
Drill out seven rivets (4) from left door panel hinge (5) to remove door assembly (6).
(d)
Drill out eight rivets (7) to remove hinge (5) from door (6).
(e)
Drill out seven rivets (8) from right door panel hinge (9) to remove door assembly (10).
(f)
Drill out eight rivets (11) to remove hinge (9) from door (10).
(4)
Roadside Panel.
(a)
Remove twenty two hex head screws (Figure 4-18, 1) and flat washers (2).
(b)
Remove five hex head screws (3), flat washers (4) and roadside panel assembly (5).
Figure 4-18. Road Side Doors and Panel Assembly
(5)
Roadside Doors.
(a)
Remove hex nut, part of each door latch (Figure 4-19, 1) to remove latches.
(b)
Drill out four rivets (2) from each door holder (3).
(c)
Drill out five rivets (4) from door hinge (5) and panel assembly (6). Remove left door (7).
4-72
