TM 9-4310-397-14
(d)
Drill out three rivets (8) from door hinge (5) and door (7).
(e)
Drill out four rivets (2) from each door holder (3).
(f)
Drill out five rivets (9) from door hinge (10) and panel assembly (6). Remove right door (11).
(g)
Drill out three rivets (12) from door hinge (10) and door (11).
(h)
Drill out four rivets (13) from caution plate (14).
(i)
Peel off decal (15) to remove.
Figure 4-19. Road Side Doors and Panel
NOTE
Insulation has an adhesive backing and must be replaced if removed.
(j)
Remove clips (16) and peel off insulation (17) and discard both.
(6)
Rear Panel.
(a)
Remove two pan head screws (Figure 4-20, 1), and lock washers (2). Discard lock washers.
4-73
