TM 9-4310-397-14
Figure 4-21. Rear Panel Hardware
NOTE
Insulation has an adhesive backing and must be replaced if removed.
2
Remove clips (3) as necessary to remove insulation (4), (5), (6), (7) and (8). Discard clips and
insulation.
3
Drill out eight rivets (9) to remove two door holders (10).
4
Drill out four rivets (11) to remove shipping data plate (12).
5
Drill out four rivets (13) to remove caution plate (14).
6
Peel off warning decal (15) from rear panel (16).
(7)
Front Panel Assembly.
NOTE
Two personnel are required to complete removal of component parts.
(a)
Remove control panel gauges per paragraphs 4-33 through 4-46.
4-75
