TM 9-4310-397-14
4-67. OIL DIP STICK AND FILLER NECK REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Equipment Conditions:
Automotive Maintenance and Repair
Roadside doors open.
Item 2, Section III, Appendix B
Oil drained. (See 4-46, c, (1).)
a.
Removal.
(1)
Remove dip stick (Figure 4-75, 1), loosen nut (2), and unscrew nipple (3). Remove preformed packing (4)
and discard.
Figure 4-75. Dip Stick and Filler Neck
(2)
Remove hex head screw (5), flat washer (6), hex head screw (7), flat washer (8), and filler neck (9).
(3)
Remove plug (10) and gaskets (11) and (12). Discard gaskets.
4-174
