TM 9-4310-397-14
6-7. ENGINE OIL PAN INSPECTION AND REPLACEMENT.
This task covers:
a.
Inspection
b.
Removal
c.
Installation
INITIAL SETUP
Tools:
Equipment Conditions:
Automotive Maintenance and Repair
Engine removed. (See para 4-72.)
Item 2, Section III, Appendix B
a Inspection. Check engine oil pan for any dents or holes. Replace if damaged.
b Removal.
CAUTION
The oil pan is attached with twenty four screws, of two different lengths. Note their positions
as they are removed to prevent equipment damage.
(1)
Remove 24 each cap screws (Figure 6-33, 1) lock washers (2) and straps (3) and pull oil pan (4) and
gasket (5) away from engine. Discard gasket and lock washers.
Figure 6-33. Engine Oil Pan
(2)
Remove drain plug (6) and washer (7).
(3)
Remove all old gasket material from oil pan and engine flange surfaces.
6-33