Figure 6-32. Firing Order

6-7. ENGINE OIL PAN INSPECTION AND REPLACEMENT

TM-9-4310-397-14 Compressor Unit Reciprocating 10 CFM 175 PSI Diesel Engine Driven Trailer Mounted Model CUE67-6DY-TM Manual
Page Navigation
285

TM 9-4310-397-14 6-6. ROCKER ARMS, CYLINDER HEAD, AND VALVES REPLACEMENT. - Continued NOTE Firing order is 1-2-3. Intake and exhaust valve locations are designated "I" and "E" in Figure 6-32. Figure 6-32. Firing Order 5 Adjust valve clearance on No.1 and 2 exhaust valves and No.1 and 3 intake valves. 6 Turn crankshaft 360° and reinsert timing pin. 7 Adjust valve clearance on No.3 exhaust valve and No.2 intake valves. (4) Install rocker arm cover per paragraph 5-6. (5) Install injection nozzles and injection lines per paragraph 6-3. (6) Install exhaust manifold per paragraph 4-71. (7) Install fuel filter per paragraph 4-69. (8) Install thermostat housing per paragraph 4-70. (9) Install engine air cleaner per paragraph 4-61. (10) If engine oil was drained from crankcase, refill with new oil of correct grade and viscosity. Install a new oil filter per paragraph 4-62. (11) Fill cooling system with clean coolant per paragraph 4-6, e. (12) Change engine oil and oil filter after 100 hours of operation. 6-32

Privacy Statement
Press Release
Contact